Adjusting The Clutch Cable Free Play; Adjusting The Rear Shock Absorber Assembly - Yamaha FZ6-SS Assembly Manual

EAA01036
K. ADJUSTING THE CLUTCH
CABLE FREE PLAY
1. Measure:
D clutch cable free play (a)
Out of specification ! Adjust.
Clutch cable free play (at the end of
the clutch lever)
10 X 15 mm (0.39 X 0.59 in)
EAA01050
L. ADJUSTING THE REAR SHOCK
ABSORBER ASSEMBLY
WARNING
Securely support the motorcycle so that
there is no danger of it falling over.
Spring preload
CAUTION:
Never go beyond the maximum or mini-
mum adjustment positions.
1. Adjust:
D spring preload
–16–
2. Adjust:
D clutch cable free play
Handlebar side
a. Turn the adjusting dial (1) in direction (b)
or (c) until the specified clutch cable free
play is obtained.
Direction (b)
Clutch cable free play is increased.
Direction (c)
Clutch cable free play is decreased.
NOTE:
Adjust the spring preload with the special
wrench and extension bar included in the
owner's tool kit.
a. Turn the adjusting ring (1) in direction (a)
or (b).
b. Align the desired position on the adjust-
ing ring with the stopper (2).
Direction (a)
Spring preload is increased
(suspension is harder).
Direction (b)
Spring preload is decreased
(suspension is softer).
Adjusting positions
Standard: 3
Minimum: 1
Maximum: 7