Yamaha FZ6-SS Assembly Manual page 2

EAA00002
This Assembly Manual contains the information required for the correct assembly of this Yamaha motor-
cycle prior to delivery to the customer. Since some external parts of the motorcycle have been removed at
the Yamaha factory for the convenience of packing, assembly by the Yamaha dealer is required. It should
be noted that the assembled motorcycle should be thoroughly cleaned, inspected, and adjusted prior to
delivery to the customer.
EAA00005
The service specifications given in this assembly manual are based on the model as manufactured.
Yamaha Motor Company, Ltd. is continually striving to improve all of its models. Modifications and signifi-
cant changes in specifications or procedures will be forwarded to all authorized Yamaha dealers and will
appear in future editions of this manual where applicable.
The procedures below are described in the order that the procedures are carried out correctly and com-
pletely. Failure to do so can result in poor performance and possible harm to the motorcycle and/or rider.
CONCERNING CRATE DAMAGE:
Follow the instructions in the Dealer Warranty Handbook, Procedure Section.
Particularly important information is distinguished in this manual by the following notations.
The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY
IS INVOLVED!
Failure to follow WARNING instructions could result in severe injury or death to the
WARNING
motorcycle operator, a bystander, or a person checking or repairing the motorcycle.
A CAUTION indicates special precautions that must be taken to avoid damage to
CAUTION:
the motorcycle.
NOTE: A NOTE provides key information to make procedures easier or clearer.
FOREWORD
NOTICE
EAA00001
FZ6-SS
FZ6-SSC
ASSEMBLY MANUAL
E2003 by Yamaha Motor Corporation,
U.S.A. First Edition, November 2003
All rights reserved.
Any reproduction or unauthorized use
without the written permission of
Yamaha Motor Corporation, U.S.A.
is expressly prohibited.
Printed in U.S.A.
P/N LIT-11666-17-50