JVC KW-R925BTS Instruction Manual page 33

TROUBLESHOOTING
Symptom
"ADD ERROR"
"CHK DEVICE"
"NO SKIPS"
"NO STATIONS"
"STATION LMT"
"UPGRADE APP"
"CONNECT ERR"
"RATING ERR"
"THUMBS N/A"
"LICENSE ERR"
Station cannot be selected. If "Explicit Content" in [Account Settings] is checked in
"NOT CONNCTD"
"CH LOCKED LOCK CODE?"
"CHAN UNSUB"
"CH UNAVAIL"
JS_JVC_KW_R925BTS_K_EN_1.indd 29
Remedy
New station creation is unsuccessful.
Check the Pandora application on your device.
The skip limit has been reached.
No stations are found.
The number of registered stations has reached its limit.
Retry after deleting unnecessary stations from your device.
Make sure you have installed the latest version of the
Pandora application on your device.
Communication is unstable.
Registration of thumbs up/thumbs down has failed due to
insufficient network connectivity.
Registration of thumbs up/thumbs down is not allowed.
You try to access from a country which Pandora is not
deliverable.
the web version of iHeartRADIO, custom stations become
unavailable.
Link to the application is impossible.
The selected channel is locked. Enter the correct pass code
to unlock. ( 13)
The selected channel is unsubscribed.
Call 1-866-635-2349 in the U.S.A. or 1-877-438-9677 in
Canada to subscribe.
The selected channel is unavailable. Visit
www.siriusxm.com for more information about the
SiriusXM channel lineup.
Symptom Remedy
"CHK ANTENNA" Check that the antenna and its connection are in good
condition.
"CHECK TUNER" Make sure the SiriusXM Vehicle Tuner is connected to the
unit.
"NO SIGNAL" Make sure the antenna is mounted outside the vehicle.
"SUBSCRIPTION UPDATED – Your subscription is updated. Press the volume knob to
PRESS ENTER TO CONTINUE." continue.
"CODE ERROR" Make sure you have entered the correct pass code.
( 13)
"NO CONTENT" There is insufficient content to start TuneScan.
"SCAN CANCEL" TuneScan has been aborted.
No Bluetooth device is • Search from the Bluetooth device again.
detected. • Reset the unit. ( 3)
Pairing cannot be made. • Make sure you have entered the same PIN code to both
the unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. ( 14)
Echo or noise occurs. • Adjust the microphone unit's position. ( 14)
• Check the [ECHO CANCEL] setting. ( 16)
Phone sound quality • Reduce the distance between the unit and the Bluetooth
is poor. device.
• Move the car to a place where you can get a better signal
reception.
Sound is being • Reduce the distance between the unit and the Bluetooth
interrupted or skipped audio player.
during playback of a • Turn off, then turn on the unit and try to connect again.
Bluetooth audio player. • Other Bluetooth devices might be trying to connect to
the unit.
29
ENGLISH
29/10/2015 9:04:56 AM