Maintenance; Service Information - Black & Decker KS700K Instruction Manual

f To switch the tool off, release the on/off switch. To
switch the tool off, when in continuous operation,
press the on/off switch once more and release it.
USING THE MODE SELECTOR
The mode selector (9) can set in 3 positions
1. Scrolling position (FIG. F and G)
allows the scroller knob (8) to be rotated for intricate
and accurate sawing. (In this position there is no
orbital action). It is recommended to use scroller
blades when in this mode.
2. Straight cutting position
position turns off orbital action and locks the scroller
knob toprevent its rotation. The scroller knob can be
locked in any of 4 positions for straight cutting.
Method of engagement:
a. Turn the Mode Selector to the scrolling position.
b. Rotate the scroller knob to the desired position (this
can be any of 4 positions - the blade can point
forwards, reverse, left or right).
c. Turn the Mode Selector to the neutral position. (In
this position the Scroller Knob cannot be turned).
3.
Orbital Action Position
switches on the orbital action for fast and efficient
straight cuts. This mode can only be selected with the
blade pointing forwards.
Method of engagement:
a. Turn the mode selector to the scrolling position.
b. Rotate the scroller knob to point the blade forwards.
c. Turn the Mode Selector to the orbital position. (In
this position the Scroller Knob cannot be turned).
HOW TO USE THE SIGHTLINE® FEATURE
f Use a pencil to mark the cutting line.
f Position the jigsaw over the line (19).
f Viewing from directly above the jigsawt he line of cut
can be easily followed Should this view be restricted
for any reason, the indent (20) can be used as an
alternate cutting guide.
HINTS FOR OPTIMUM USE
GENERAL
f Use a high speed for wood, a medium speed for
aluminum and PVC and a low speed for metals other
than aluminum.
SAWING LAMINATES
As the saw blade cuts on the upward stroke, splintering
may occur on the surface closest to the shoe plate.
f Use a fine-tooth saw blade.
f Saw from the back surface of the workpiece.
f To minimize splintering, clamp a piece of scrap wood
or hardboard to both sides of the workpiece and saw
through this sandwich.
- this position
(FIG. H, I and K) this
(FIG. J and L) - this position
(FIG. J)
SAWING METAL
f Be aware that sawing metal takes much more time
than sawing wood.
f Use a saw blade suitable for sawing metal.
f When cutting thin metal, clamp a piece of scrap wood
to the back surface of the workpiece and cut through
this sandwich.
f Spread a film of oil along the intended line of cut.
Warning! Fire Hazard. Do not use vacuum adapter
when cutting metal. Metal filings will be hot and could
cause a fire in the vacuum container.

MAINTENANCE

Use only mild soap and damp cloth to clean the tool.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
Important! o assure product SAFETY and repairs,
maintenance and adjustment should be performed by
authorized service centers or other qualified service
personnel, always using identical replacement parts.
ACCESSORIES
Recommended accessories for use with your tool are
available from your local dealer or authorized service
center.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.

SERVICE INFORMATION

Black & Decker offers a full network of company-owned and
authorized service locations. All Black & Decker Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service centers
and if you need technical advice, repair, or genuine factory
replacement parts, contact the Black & Decker location
nearest you, or visit us at www.BlackandDecker-la.com
ENGLISH • 17