Operating principles
The glass ceramic cooktop is equipped
with electronic sensor controls which
react to finger contact. For safety
reasons, in order to switch the cooktop
on, the On/Off sensor needs to be
touched for a little longer than the other
sensors.
A tone sounds each time a sensor is
touched.
Malfunction due to dirty and/or
covered sensors:
If the sensors are dirty or covered,
this could cause them to fail to react,
to activate a function or even to
switch the cooktop off automatically
(see "Safety switch-off"). Placing hot
pans on the sensors/indicators can
damage the electronic unit
underneath.
Keep the sensors and indicators
clean and do not place anything on
top of them. Do not place hot pans
on them.
Operation
25