Aking C Ontroller S Ettings - Promise Pegasus2 R6 Product Manual

m C
Aking ontroller
T o make controller settings:
1. From the Device menu, choose Component List.
Mouse-over the controller, then click the Settings button.
2.
Make setting changes as required:
• Enter, change or delete the alias in the Alias field.
• SMART Log – Check the box to enable or uncheck to disable.
• SMART Polling Interval – Enter a value into the field, 1 to 1440 minutes. 1440 minutes =
24 hours
• Enable Coercion – Check the box to enable or uncheck to disable.
• Coercion Method – Choose a method from the dropdown menu:
• GBTruncate
• 10GBTruncate
• GrpRounding
• TableRounding
• Write Back Cache Flush Interval – Enter a value into the field, 1 to 12 seconds.
• Enclosure Polling Interval – 15 to 255 seconds.
• Adaptive Writeback Cache – Check the box to enable or uncheck to disable.
• Forced Read Ahead – Check the box to enable or uncheck to disable.
Click the Save button.
3.
4. Click the X icon to close the settings panel.
s
ettings
31
Promise Technologies