User Manual
/
MBR1200B
•
Secure HTTPS Port – Enter the port number you want to use. The default is 443.
•
Enable SSH Server – When the router's SSH server is enabled you may access the router's command line
interface (CLI) using the standards-based SSH protocol. Use the username "admin" and the standard system
password to log in.
•
SSH Server Port – Default: 22.
•
Automatically Set System Identifier – This will automatically set the system ID to the name of the first
client that gets a DHCP lease. This feature cannot be used with email alerts but alerts can be sent to ECM.
GPS
If you have an attached device with GPS support, you can enable a graphical view of your router's location,
which appears in STATUS > GPS. SIM-based models with GPS support require that the SIM be inserted. Some
carriers disable GPS support in otherwise supported modems. If you encounter issues with obtaining a fix,
contact your carrier and ensure that GPS is supported.
Enable GPS – Enable support for querying GPS information
from capable modems.
Send to Client(s)
•
Enable this Server - Enables a local server to which
clients can connect and recieve GPS sentences.
•
Server Name - Your server's name should include only
Aa-Zz, numerals, and '_'.
•
Enable GPS server on LAN - Enables a server on the
LAN side of the firewall which will periodically send
GPS sentences to TCP connected clients.
•
Enable GPS server on WAN - Enables a server on the
WAN side of the firewall which will periodically send
GPS sentences to TCP connected clients.
•
Port - Choose a port between 1 and 65535.
Send to Server(s)
•
Enable this client - Enables periodic reporting of GPS
sentences to a remote server. The router will buffer
GPS sentences if errors are encountered or if the
Internet connection goes down, and send the buffered
sentences when the connection is restored.
•
Client name - Your client's name should include only
Aa-Zz, numerals, and '_'.
•
Server - Remote server hostname or IP.
•
Port - Remote server port.
•
Specify Time Interval - Restricts the GPS sentence
reporting to a remote server to a specific time
interval.
•
Start Time - Reporting start time.
•
End Time - Reporting end time.
©2016 Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
|
cradlepoint.com
5/3/16
54