Headlamp adjustment
To avoid causing a nuisance to other road
users, the height of the headlamps should be
adjusted in relation to the load in the vehicle.
0. Driver only or driver + front passenger.
-. Intermediate setting.
1. 5 people.
-. 5 people + load in the boot.
2. Driver only + maximum authorised load in
the boot.
This position is sufficient to avoid causing
dazzle.
Higher settings may limit the spread of light
from the headlamps.
The initial setting is position "0".
Travelling abroad
LEd / Xenon front lamps
For motoring in countries that drive on the other
side of the road, it is necessary to adapt the
adjustment of the dipped beams so as to not
dazzle the drivers of approaching vehicles.
F Raise the bonnet for access to the adjuster
(one adjuster per headlamp).
F Insert a suitable allen key (not supplied)
into the hexagonal head of the adjuster.
F Turn the allen key half a turn clockwise.
On your return, don't forget to return
your headlamps to their initial setting,
by carrying out these operations in
reverse order.