What to do if the CARD SETUP screen is displayed
When the power is turned on, the camera checks the card automatically. If
the card in the camera has to be formatted, the following screen appears.
Note that all existing data stored on the card
is erased when the card is formatted.
To turn the camera off
Press
on the arrow pad
to select POWER OFF, then press
the
(OK/Menu) button.
The camera turns off.
Turning the power on/off
To format the card
Press
on the arrow pad
to select
FORMAT and press
the
(OK/Menu) button. Then
select YES and press
start formatting.
Formatting starts.
If the card was successfully
formatted, the camera is ready to
take pictures.
again to
19