Olympus AZ-4 Zoom Instructions Manual page 10

Close the camera back.
The film is automatically wound until the
exposure counter reads 1.
* If the film is wound incorrectly, the
will blink and the shutter release will not
operate. In this case, open the film
compartment cover and load the film
again.
Film type confirmation: This is possible
through the window in the camera back.
* When using a non-DX film, if the film is
not wound correctly, the number
indicator in the LCD panel will stop on
indication will not appear
0. The
in the LCD and the shutter release may
not lock.