Hd Radio Operation; Selecting Hd Radio - Peripheral Electronics PXAMG Owner's Manual

6. HD Radio Operation

6.1 Selecting HD Radio

Simply press and release the AUX or SAT button until "HD Radio" is
displayed on the screen.
** When you press the AUX or SAT
button, you will see the corresponding
SAT mode (for example SAT 1), a
slight delay, and then the current
Media Gateway
displayed (HD Radio/iPod/Sat1 - Sat
2 - Sat 3/Line In).
Tune Up / Seek Up
Press the SEEK► button to advance one station or to seek to next
broadcasting station.
Tune Down / Seek Down
Press the ◄SEEK button to move back one station or to seek back to
previous broadcasting station.
Changing from auto seek to manual tuning:
Press and hold SEEK► button for
longer than two seconds to toggle
between manual tune and auto tune
modes. Either "MANUAL" or "AUTO"
will be displayed on the screen to verify
which mode is selected.
Changing Bands
Press and release the AUX button to
cycle through FM1, FM2, FM3 and AM1.
Storing Radio Stations into Preset Memory
Once you have tuned to a station you wish
to store as a preset you will need to press
and hold one of the preset buttons (1-6)
for longer than two seconds to store it
into that location. The screen will display
"PR SAVED" and your preset has been
stored into memory.
Recall Stored Preset Stations
Press and release the Preset Button(1-6) that represents the station
stored in memory that you wish to recall.
5
mode will be