Compatibility Notes; Programming The Media Gateway (Pxamg) - Peripheral Electronics PXAMG Owner's Manual

3. Compatibility Notes

This section will inform you of the specific requirements for your
factory radio to be compatible with the Media Gateway. These
notes will inform you of any issues or circumstances that can affect
the compatibility of our product with your radio, audio system, or
accessories. Not all Factory radios are compatible with the Media
Gateway. The Media Gateway will only work on models equipped
with the specifications listed below. Please read and understand
these notes before proceeding:
Radio Requirements
Radios must be "can-bus", satellite ready, and may have "MP3"
printed on the face plate of the radio. This indicates that the required
connection is present on the rear of the head unit and that the radio
has the necessary functionality to operate the Media Gateway.
Refer to www.peripheralelectronics.com/apps
for most updated application guide.
4. Programming the Media
Gateway
(PXAMG)
The Media Gateway may need to be programmed before installation.
To program the interface you will need to set the dip switches
located on the side of the interface (see Fig. 1 below) to the proper
configuration listed below. Prior to installation the switches are in
their default setting of "off" in the up position and are turned "on"
when switched down. Refer to the chart below.
Dip Switch Configuration Chart
Features 1 2 3 4
IPOD, HD RADIO, SAT off off off off
PORT 1 PORT 2
OFF
ON
Fig. 1 Side view of interface with dip switches in correct position
2