Installation - Peripheral Electronics PXAMG Owner's Manual

7. If connecting an iPod, connect the 8-Pin mini-din iPod cable
into the second port on the Media Gateway (closest to the
dipswitches). Carefully run the 11 foot iPod cable behind the
dash to the location where the iPod will be mounted or stored (for
example the glove box or center console). This location will
vary based on the vehicle, and the customer's prefrence.
When running this cable through the dash be sure to secure
it away from moving parts or sharp metal edges that may
damage the cable.
8. To complete the installation secure the Media Gateway
(PXAMG) and HD Radio tuner (HDRT) into the cavity in the
dash behind the radio. Be sure that the cables and interface
modules are not near moving parts or sharp metal edges as
they may damage the cables. To prevent rattling noises inside
the dash, use zip ties, or electrical tape, or other fasteners to
mount the interfaces to the factory wiring or installed audio
components (for example under the factory Satellite tuner
(if present).
9. With all connections made, reconnect the vehicle's battery, insert
the key into the ignition, and turn the vehicle on. Check for proper
operation of the Media Gateway and HD Radio tuner before
reinstalling the factory dash panels.
Sample Mounting Locations: You can Secure your Media
Gateway and HD Radio tuner in the shaded areas shown below.
Mounting location for Media Gateway
or HD Radio tuner
Mounting location for Media Gateway
or HD Radio tuner
4