General
Button Lock
USB Auto Play Lock
Standby Control
Lamp Schedule
OSD Display
- The displayed image may differ depending on the model.
Button Lock
It sets safe lock function.
Off
•
This menu can be used to lock the buttons on the product.
Off
Only the remote control can control the product if
Auto
USB Auto Play Lock
Off
Select whether to automatically play
•
•
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
•
•
•
Off
/
On
MagicInfo
On
Do not play
MagicInfo
content saved on the USB device automatically.
― Connecting a USB device containing
MagicInfo
Off
Play
MagicInfo
content saved on the USB device automatically.
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message
No Signal
will appear if no source device is connected.
On
Power-saving mode will activate if no input signals are detected.
Off
No Signal
The message
will appear if no input signals are detected.
― The
Standby Control
option is only enabled when
― If
No Signal
is displayed although a source device is connected, check the cable connection.
Button Lock
is set to On.
content saved on a connected USB device.
content displays
"USB Auto Play Lock :
Source
is set to HDMI1, HDMI2.
On" for five seconds.
117