General
Button Lock
USB Auto Play Lock
Standby Control
Lamp Schedule
OSD Display
- The displayed image may differ depending on the model.
Button Lock
It sets safe lock function.
Off
•
This menu can be used to lock the buttons on the product.
Off
Only the remote control can control the product if
Auto
USB Auto Play Lock
Off
Lock USB memory devices to prevent them from being auto detected.
•
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
•
•
•
Off
/
On
Off
On
/
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message
No Signal
will appear if no source device is connected.
On
Power-saving mode will activate if no input signals are detected.
Off
No Signal
The message
will appear if no input signals are detected.
― The
Standby Control
option is only enabled when
― If
No Signal
is displayed although a source device is connected, check the cable connection.
Button Lock
is set to On.
Source
is set to HDMI1, HDMI2.
114