leakSMART
Setup and Operation
*All contents for the Hub Setup are located in the brown box
1.
•
•
•
•
•
•
•
Hub
™
Plug in the leakSMART
power cord indicates 'Hub only').
Connect the provided Ethernet Cable to the Hub. Connect the other end of the Ethernet
cable to your home Internet. You may choose to connect directly to an Ethernet
wall interface, to an Ethernet switch device or to a WiFi adapter*.
*If using a switch device or WiFi adapter, reboot the device or adapter to
�
automatically detect your new leakSMART
A blinking red light will indicate a successful connection to your home Internet. Solid red
indicates no connection.
Now, open the leakSMART
user credentials.
Select "Add Hub". You will be prompted to scan the serial/MAC Address located
on the bottom of the leakSMART
the serial/MAC Address. Hub*.*QAR Code supported with 4.0 Android/8.0 IOS and
higher.
Enter geographical location of installation (city,state) and press "Next" .
The leakSMART
Hub should now be successfully added to your account.
™
A solid green light will indicate a successful connection.
Hub with the provided 5V Power Supply (sticker flag on the
™
App on your smart device and log-in with your
™
Hub. You may also choose to manually enter
™
Hub.
™
5