Advertisement
leakSMART
Sensor Setup and Operation
8
™
1.
Pair each leakSMART
•
Your leakSMART
alarm, even without connection to your leakSMART
but pairing means the system will signal your leakSMART
Valve to automatically shut off your water and send you
instant notifications, preventing water damage within 10
seconds.
•
Install the provided 3 AAA alkaline batteries (DO NOT screw
on battery door cover until pairing is successfully completed).
The sensor will beep once and blue indicator light will flash
rapidly.
•
On the leakSMART
enter into pairing mode. As a reminder, a green flashing light
on the leakSMART
3 minutes while in pairing mode.
•
On the leakSMART
the batteries once. The sensor will beep 5 times indicating
a successful pairing. leakSMART
Sensor Reporting' on the home screen (located below the
valve icon).
•
We recommend naming your sensor in the overview page of
your APP (i.e. Bath, Kitchen) .
leakSMART
™
blue light every 60 seconds.
Sensor with your smart home system
™
sensor provides an audible water detection
™
Hub briefly press the blue button once to
™
Hub indicates pairing mode and will last
™
Sensor press black button located above
™
™
Sensor is now paired and should display a flashing
Hub —
™
App should register '1
™
Advertisement
