Advertisement
leakSMART
™
Professional Installation Steps
The leakSMART
Valve is a patent-pending, wireless, motorized brass water
™
ball valve that connects directly to a home's main water supply. Professional
installation is strongly recommended to ensure proper operation and
reliable water damage prevention.
•
The leakSMART
main water shutoff
•
To avoid any injury, never place your fingers inside the valve
Please note:
•
Do not grip plastic motor drive for leverage when installing the valve
•
Do not install on fire suppression systems or fire sprinkler water lines
1.
Ensure that you have all necessary leakSMART
and fittings required for installation:
•
leakSMART
•
AC power adapter with 10 ft. cord
•
4 AA Alkaline batteries (not provided)
2.
To protect the valve cover from possible damage, remove it by
sliding it away from the valve, and keep it off until you've completed
installation.
3.
Shut off the main water supply valve.
4.
Open both hot and cold handles on the faucet nearest the
valve to relieve water pressure.
Valve may only be installed in homes with an existing
™
Valve (3/4" FIP x 3/4" MIP) or (1" FIP x 1" MIP)
™
Valve components
™
11
Advertisement
