Connecting To A Set-Top-Box With Hdmi Cables - Olevia 265T FHD User Manual

Connecting to a Set-Top-Box with HDMI Cables (Preferred TV connection)
Disconnect all power sources before making any connection.
1. Connect a 75-ohm coaxial cable (or choice of Antenna Cable) from your cable or antenna to the
Set-Top-Box's Antenna jack (RF Terminal).
2. Connect a HDMI cable from the Set-Top-Box's HDMI OUT jacks to the TV's HDMI IN jacks.
For 265 TFHD Model
Cable/ Satellite
Set-Top-Box
Note: HDCP is a copy protected digital connection that receives analog or digital video and audio signals from
equipment with a HDMI output that features the HDCP function. HDMI allows the transfer of digital
uncompressed data to the TV. This connection is superior when compared to the Component, S Video or AV
(composite) connections.
Note: HDMI signal is purely digital and provides a better picture, it is better than component, S-Video or
Video connections. It is strongly recommended to use this connection if you have this function on your
equipment.
TV Installation and Connection Guide
2
HDMI cable
1
(75-ohm
coaxial
cable)
16
Rear of TV
HDMI 1
R L
HDMI 2
R L
VGA / RS232C
Component 3 Control Port
R L
Firmware
Upgrade Port