Connecting To A Satellite Receiver Or Cable Box With Component Connectors - Olevia 265T FHD User Manual

TV Installation and Connection Guide
Connecting to a Satellite Receiver or Cable Box with Component
Connectors (Secondary Preferred after HDMI)
Disconnect all power sources before making any connections.
Use this method of connection if your Satellite Receiver or Cable Box has component (Y, Pb, Pr) jacks.
1.Using a component video cable, connect the Satellite Receiver or Cable Boxes' Y, Pb and Pr jacks to the Y,
Pb and Pr jacks on the TV.
Colors on Component Video connectors:
Y: Green
Pb (also identified as Cb, CB or B-Y): Blue
Pr (also identified as Cr, CR or R-Y): Red
Note: The Y, Pb and Pr jacks on your Satellite Receiver or Cable Box are sometimes labeled as Y, Cb and Cr,
or B-Y and R-Y. If so, connect the cables to the matching colors.
2.Using an Audio cable, connect the Satellite Receiver or Cable Boxes' Audio OUT jacks to the TV's Audio in
jacks.
For 265 TFHD Model
Component
cable with
RCA connector
Satellite Receiver or Cable Box
Note: The Y, Pb and Pr jacks do not provide audio, so audio cables must be connected to provide sound.
Note: The YPbPr connection provides the best quality of video signal compared to AV (composite) and
S-Video connection.
Note: YPbPr is set at default to best perform with FHD 1080p content, set Input to "Interlace DVD" for
best performance with regular 480i and 480p content.
(Menu - Picture - Mode - Input = "Interlace DVD")
HDMI 1
R
HDMI 2
R
VGA /
Component 3
R
Firmware
Upgrade Port
Rear of TV
Green
Blue
Red
White
Red
Audio cable
17
L
L
RS232C
Control Port
L