Connecting To A Satellite Receiver Or Cable Box With A/V Cables - Olevia 540 User Manual

TV Installation and Connection Guide
Connecting to a Satellite Receiver or Cable Box with A/V Connectors
Disconnect all power sources before making any connections.
1.Connect a 75-ohm coaxial cable from your Cable TV to the Satellite
Receiver's or Cable Box's Ant (Antenna) jack.
2.Using Audio and S Video cables, connect the satellite receiver's Audio
and S Video OUT jacks to the TV Audio and S Video IN jacks.
(Cable TV)
1
(75-ohm coaxial cable)
Satellite Receiver or Cable Box
Note: When you connect video equipment to both the same Video and
S Video input jacks, display will automatically select S Video first.
To view S Video signal, please disconnect Video jack or turn off the
Video signal on the video equipment.
S-Video is strongly recommended for use if your VCR or video equipment
has it because S-Video input has better quality of picture than a composite
Video signal.
2
S Video cable
A/V cable with RCA connector
19
Rear of TV
Red
White
Yellow
3