Olevia 265T FHD User Manual page 25

TV Installation and Connection Guide
Connecting to a Blue-Ray DVD Player
or HD-Receiver with HDMI Cables
Disconnect all power sources before making
any connections.
1.Using a HDMI cable, connect the DVD's HDMI
output terminal to the TV's HDMI-HDCP input
terminal.
Note: HDCP is a copy protected digital connection
that receives analog or digital video and audio signals
from equipment with a HDMI output that features the
HDCP function. HDMI allows the transfer of digital
uncompressed data to the TV. This connection is
superior when compared to the Component, S Video
or AV (composite) connections.
Note: HDMI signal is purely digital and provides a
better picture, it is better than component, S-Video or
Video connections. It is strongly recommended to use
this connection if you have this function on your
equipment.
Connecting to a PC with VGA
Connector
Disconnect all power sources before making any connections.
1.Using a D-Sub 15 pin cable, connect the VGA output terminal of the PC to the TV's VGA signal input terminal.
2.You may need to use a Stereo mini jack to Audio in connectors to receive audio.
For 265 TFHD Model
Rear of TV
For 265 TFHD Model
Rear of TV
H D M I 1
R L
H D M I 2
R L
D-sub 15 pin cable
VGA / RS232C
Component 3 Control Port
White
Audio cable
R L
Red
Firmware
Upgrade Port
23
HDMI 1
R L
HDMI 2
R L
Blue-Ray DVD
Player / HD-Receiver
VGA /
RS232C
Component 3 Control Port
R L
Firmware
Upgrade Port
PC
HDMI
cable