Tyre Check; Head Light Check - Benelli BN251 Owner's Manual

EN

TYRE CHECK

Use a gauge to check the pressure.
Pressure should be measured while
tyres are cool.
Tyre pressure
Front tyre: 2.4 bar
Back tyre: 2.4 bar
• Make sure that there are no fragments
of metal, nails or gravel in the tyre
tread. Remove if necessary.
Senza titolo-2 29
• Check for wear. Replace tyres if the
wear is excessive or irregular. The
depth limit for tread is:
Front tyre: 1.6 mm
Back tyre: 1.6 mm
WEAR LIMIT
IMPORTANT NOTICE:
Incorrect pressure, or excessive or
irregular wear to tyres will reduce vehi-
cle stability.
92

HEAD LIGHT CHECK

With the engine running, check the
correct operation of positioning lights,
front and back, the strong and dipped
headlights and the numberplate light.
Headlamp adjustment
Sit on the vehicle at a distance of 10
metres from a wall. Switch on the high
beam and measure the maximum height
of the lit area.
• Standard height from ground level:
9/10 total height
10 m
21/12/2015 15:49:57
-