Getting Started; Helpful Hints; Care And Cleaning - ClassicFlame 28WM426 Assembly Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

P L E A S E R E A D A N D F O L L O W A L L S A F E T Y T I P S
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all parts. Make sure
you do not discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer
Service: parts@twinstarhome.com or call 1-866-661-1218 in English, 1-866-374-9203 in French
or 1-866-661-1218 in Spanish. Please identify the parts you need and model number. Make sure
to include your name and address.
DO NOT MOVE MANTEL OR INSERT WHILE PLUGGED INTO POWER SUPPLY.
• Some steps are more easily handled with two adults.
• Attach the fireplace insert to the completed wood mantel last. INSTALL INSERT IN FROM THE
BACK OF THE FIREPLACE SO AS NOT TO SCRATCH THE HEARTH/BASE.
• Use care in assembling your new f ireplace, take your time and use the hardware provided and a
quality Phillips head screwdriver. NEVER OVER TIGHTEN BOLTS.
• Do not sit on top of the mantel.
1. Dust your fireplace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your f ireplace with a gentle non-abrasive household cleaner. Make sure to dry your
fireplace immediately with a soft cloth or towel.
For a complete tight fit every bolt
should have a flat washer. First slide a
flat washer onto the bolt. Your bolt is
now ready for use.
Now it is time to assemble your Fireplace. All
panels are labeled Left and Right as viewed
from the front of unit.
1. Locate Hearth/Base (A) and set out finished side
up on the floor.
2. Locate Left Front Panel (B), and insert one Wood
Dowel (N) into each of the pre-drilled holes.
Then use Bolts (L) and Washers (M) through the
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
3. Locate Right Front Panel (C), and insert one
Wood Dowel (N) into each of the pre-drilled
holes. Then use Bolts (L) and Washers (M)
through the pre-drilled holes in the mounting
blocks.
HAND TIGHTEN ONLY.
E-2

GETTING STARTED

CAUTION:

HELPFUL HINTS

CARE & CLEANING
Right Front
Panel
C
L
M
N
N
Hearth/Base
A
Left Front
Panel
B
L
M
N
N

Advertisement

Table of Contents
loading

Table of Contents