Fork: Compression, Rebound, Purge - SHERCO SE 4.5i-f Owner's Manual

FORK
Fork compression adjustment
The screws 1 determine the behaviour
of the fork when compressed. Turning
them clockwise increses the compres-
sion and vice-versa.
Standard adjustment:
Turn clockwise to the stop, then back
1
off 14 clicks
Fork rebound adjustment
The screws 2 determine the behaviour
of the forks in the rebound mode.
Turning them clockwise increases the
2 3
rebound and vice-versa.
Standard adjustment:
Turn clockwise to the stop, then back
off 12 clicks
Fork air purge
2 3
After a period of operation, air pressure
builds up in the fork.
Every 5 to 10 hours of use (depending
on intensity), you will need to bleed the
air.
With the forks cold, fully extend the fork,
remove and then replace and tighten
each screw 3 on both fork caps.
74