Advertisement
Model EP100
Charging your EP100
Before you use the EP100, the internal battery pack should be
charged with the USB charge cable until the battery indicator
light indicates a full charge. To charge the EP100 with the USB
cable, insert the USB charge cable into a USB power source and
plug the micro USB connector into the micro USB port on the
side of the portable power bank. When the unit is fully charged,
the batery indicator light will have 4 bars.
How to charge a device with the EP100
1. Cell phones and USB-powered devices can be charged
using the USB charge cable for that device. Connect the
charge cable to the USB outlet port on the side of the
EP100.
2. Quick Press the Power On/Off button.
3. Device will charge up to 2 amps.
4. Once your device is fully charged, remove the charge cable
from the EP100.
5. Once you have removed the charge cable from the EP100,
the EP100 will automatically turn off.
6. To charge multiple devices at once, follow the steps listed
above using the remaining available USB out. Please keep
in mind that charging two devices at once will limit your USB
output to 1 amp per device.
Hint: If you follow the above directions on how to charge a
device and the battery indicator light does not illuminate you will
need to charge your EP100 before attempting to charge a device.
midlandusa.com
Page 5
Advertisement
