Technical Specifications Of Midland Btski; Charging Batteries - Midland BTSKI User Manual

Midland BTSKI
Thank you for purchasing Midland BTSKI
Intercom, the wireless Intercom system designed
for leisure users that want to practice winter
sports without giving up the comfort of Bluetooth
communications. Midland BTSKI can be simply
wear or fitted on your semi-rigid helmet.
Thanks to Bluetooth
BTSKI allows Bluetooth
through a mobile phone, with another BTSKI
device (Intercom function) and music sharing in
stereo mode.
Content of the packaging
BTSKI device
› 1
› 1 Audio kit with two stereo speakers and 1
microphone with boom
› 1 Velcro strip to fix the unit onto the helmet
› 1 Stereo audio cable to connect an iPod/ or
other models of MP3 players
› 1 Mini USB wall-mounting power supply
Technical specifications
of Midland BTSKI
› Bluetooth ver. 2.0 stereo (Headset/Handsfree/
A2DP protocol)
› AGC system automatically controls the
volume in relation to background noise
› Voice (VOX) or manual activation of the
communication
› Mobile phone connection
› Manual controls to
intercom and wire connection
› Fully waterproof/snowproof
› Lithium battery with 8 hours talk time
2
technology, Midland
communications,
enable: telephone,
› Recharge time: app. 4 hours
› Intercom: max coverage of app. 200mt
outdoors
Bluetooth connections:
› To a mobile phone/MP3 player
› With another BTSKI device for Intercom
communications
Wire connections:
› For stereo audio input (iPod/MP3 player)
› For PMR446 transceivers (with optional
cable)
Attention: before using BTSKI for the first
time, remember to recharge it for at least 4
hours.
Attention: Midland BTSKI is designed to
withstand rain and snow. However, if it is
raining, always verify that the rubber caps
protecting the sockets are fully fitted.

Charging batteries

Make sure that the unit is fully charged before
use. Allow at least 5-6 hours for a full charge
before using the unit for the first time. Normally,
after the first time, it takes 4 hours for a full
charge.
Charge the unit by inserting the wall-charger
into the charging socket (lift the rubber cover to
insert the plug).
› The red LED on the unit will start flashing
when charging begins.
› Allow the headset to charge until the red LED
turns off.
› When the charge is complete, release the
headset from the charger.