Print Head Care; Replacing/Swapping The Print Head (Colour Or Black-Only) - Oki OKIJET 2500 User Manual

Print Head Care

The OKIJET 2500 requires minimal maintenance. The procedures
in this section of the manual describe routine Print Head
maintenance and cleaning.

Replacing/swapping the print head (colour or black-only)

Note: If your printer has never had a Print Head installed, refer
to the "Installing the Print Head for the first time" section
of your Setup Guide for instructions.
Note: The printer must be turned ON to perform the following
steps.
1. Press the Cartridge Change/Clean button on the control panel.
User's Guide
2. Open the Top Cover.
3. Once the Carriage moves to the centre and stops, move the
green Cartridge Lock Lever to the forward position and remove
the Print Head.
Caution: Ensure that the green Carriage Lock Lever is STILL in
the forward position before performing the next step.
9