Blurry, or jagged vertical lines
Cause:
Paper problem.
Solution: Turn the paper over to print on the other side.
Cause:
Print Head out of alignment.
Solution: •
Perform Print Head alignment procedure in the
printer driver. (Access via the 'Printer Services'
button).
•
Switch to High Quality print mode in the printer driver.
Print image is clipped or off edge of print media
Cause:
The selected document margins exceed the printer
margins.
Solution: Adjust margins in the application as necessary.
Cause:
Incorrect settings for media type and/or type in the
printer driver setup.
Solution: Ensure correct selection of media size and type in the
printer driver setup.
User's Guide
Paper is not feeding properly
Cause:
Paper jams / multifeeds.
Solution: •
Align the left edge of the paper with the Left Paper
Guide. Adjust the Paper Guide Lever to the right
edges of the paper.
•
Remove paper, fan the paper then reload.
•
Use new paper.
•
Ensure that paper is loaded properly. Do not over
load the Paper Tray.
•
Make sure that only one type of paper is loaded in
the tray: mixing different types of paper in the tray
will cause paper jams.
•
Verify use of recommended media. Refer to
"Selecting and Ordering Supplies".
Low Ink Indicators ON
Cause:
Low ink.
Solution: Purchase new ink Cartridges. Ink Cartridges will soon
be empty.
21