Setup Power Settings Menu - Optoma S341-M User Manual

UsInG THE PRoJECToR
filter Reminder
Choose this function to show or hide the warning message when the changing filter message is displayed. The
available options include 300hr, 500hr, 800hr, and 1000hr.
filter Reset
Reset the dust filter counter after replacing or cleaning the dust filter.

setup power settings menu

Direct Power on
Choose "On" to activate Direct Power mode. The projector will automatically power on when AC power is supplied,
without pressing the "Power" key on the projector keypad or on the remote control.
signal Power on
Choose "On" to activate Signal Power mode. The projector will automatically power on when a signal is detected,
without pressing the "Power" key on the projector Keypad or on the remote control.
notee:
If the "Signal Power On" option is turned "On", the power consumption of the projector in standby mode will
be over 3W.
auto Power off (min)
Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the
projector. The projector will automatically power off when the countdown has finished (in minutes).
sleep Timer (min)
Configure the sleep timer.
‡ sleep Timer (min)e:
a signal being sent to the projector. The projector will automatically power off when the countdown has
finished (in minutes).
notee: The Sleep Timer is reset every time when the projector is powered off.
‡ always one:
Quick Resume
Set the quick resume setting.
‡ one: If the projector is accidentally turned off, this feature allows the projector to be instantly powered
on again, if selected within a period of 100 seconds.
‡ offe: The fan will start cooling the system after 10 seconds when user turns off the projector.
Power mode (standby)
Set the power mode setting.
‡ activee: Choose "Active" to return to normal standby.
‡ Eco.e: Choose "Eco." to save power dissipation further < 0.5W.
notee:
‡ If the "Signal Power On" option is turned "On" or the "Audio Out (Standby)" option is turned "On", the
power consumption of the projector in standby mode will be over 3W.
‡ The fans will still run in active standby if "Signal Power On" is enabled.
Sets the countdown timer interval. The countdown timer will start, with or without
Check to set the sleep timer always on.
39
English