Optoma S341-M User Manual page 32

UsInG THE PRoJECToR
Color settings
Configure the color settings.
‡ brillianColor
enable higher brightness while providing true, more vibrant colors in picture.
‡ Color Temperature (data-mode only)
‡ Color Temperature
Color matching
‡
± Color: Adjust the red (R), green (G), black (B), cyan (C), yellow (Y), magenta (M), and white (W)
level of the image.
± Saturation: Adjust a video image from black and white to fully saturated color.
± Hue: Adjust the color balance of red and green.
± Gain: Adjust the image brightness.
± Reset: Return the factory default settings for color matching.
± Exit: Exit the "Color Matching" menu.
RGb Gain/biase:
‡
image.
± Reset: Return the factory default settings for RGB gain/bias.
± Exit: Exit the "RGB Gain/Bias" menu.
‡ Color space (non-HDmI input only)
AUTO, RGB, or YUV.
‡ Color space (HDmI input only)
RGB(0-255), RGB(16-235), and YUV.
‡ RGb Channele:
‡ White levele:
‡ black levele:
‡ saturatione:
‡ Huee: Adjust the color balance of red and green.
‡ IREe: Allow user to adjust IRE value when inputting Video signals.
notee:
‡ Exit : Exit the "Color Settings" menu.
signal
Adjust the signal options.
‡ automatic
automatic is disabled, the frequency and phase items will appear for tuning and saving the settings.
‡ frequency
card. Use this function only if the image appears to flicker vertically.
‡ Phase : Synchronize the signal timing of the display with the graphic card. If the image appears to be
unstable or flickers, use this function to correct it.
‡ H. Position
‡ V. Position
‡ Exit : Exit the "Signal" menu.
32 English
: This adjustable item utilizes a new color-processing algorithm and enhancements to
Tm
: Select a color temperature from D50, D65, D75, D83, D93, and Native.
: Select the following options:
This settings allows to configure the brightness (gain) and contrast (bias) of an
Select from normal, red, green, or blue channels.
Allow user to adjust White Level when inputting Video signals.
Allow user to adjust Black Level when inputting Video signals.
Adjust a video image from black and white to fully saturated color.
IRE is only available with NTSC video format.
: Configure automatically the signal (the frequency and phase items are grayed out). If
: Change the display data frequency to match the frequency of your computer's graphic
: Adjust the horizontal positioning of the image.
: Adjust the vertical positioning of the image.
: Select a color temperature from Warm, Medium, or Cool.
: Select an appropriate color matrix type from the following:
: select an appropriate color matrix type from the following: Auto,