Oki Microline 8480FB User Manual page 38

Group
Front Feed
Rear Feed
Adjustment
Item
TOF
Form Tear-Off
Initial Pos.
PE Pos.
Gap Control
Gap Pos.
Not Used.
TOF Adj. (Cut)
TOF Adj.(CSFF)
TOF Adj.(CSFR)
Front Load Adj.
PE Adj. (Cut)
PE Adj. (CSFF)
PE Adj. (CSFR)
PE Adj. (Front)
PE Adj. (Rear)
Microline 8480FB User's Guide
Function Setting Menu • 38
Settings
2.12 mm (1/12"), 3.18 mm
(1/8"), 6.35 mm
mm (1/3"), 10.58 mm (5/12"),
19.05 mm (9/12"), 23.28 mm
(11/12"), 25.4 mm (1"), 27.52
mm (13/12"), 1Chr. Set Pos.
Note: 1Chr. Set Pos. automatically
appears as the setting when the
front panel has been used to set a
1Chr. Set Pos value for the Front
Feed path (see page 58).
Off, On
Print, Tear Off
3.18 mm (1/8"),
(1/4")
Auto, Manual Gap x
x = 1 to 8, A to E (see page 67)
50.8 mm (2"), 101.6 mm (4")
-40 to 0 to +40
in increments of 1/120 inch
Not Used.
Not Used.
-40 to 0 to +40
in increments of 1/120 inch
-15 to 0 to +15
in increments of 1/120 inch
Not Used.
Not Used.
-15 to 0 to +15
in increments of 1/120 inch
Not Used.
(1/4"), 8.47
6.35 mm