Oki LPR C7500 User Manual page 47

Item
MP TRAY USAGE
MEDIA CHECK
TRANSPARENCY
CHECK OHP
RESOLUTION
TONER SAVE
MODE
MONO-PRINT
SPEED
Print Menu (continued)
The default settings are
Value
Normal tray; High
priority tray; Feed
when mismatching;
Do not use
Enable; Disable
Auto; Disable
C7100 - 600 x 1200
dpi; 600 dpi
C7300 - 600 dpi x
1200 dpi
C7500 -1200 dpi,
Fast 1200 dpi, 600
dpi
ON; OFF
Auto; color speed;
Normal speed
C7100/C7300/C7500 Setting up • 46
bold
face.
Description
Specifies MP tray usage.
Normal tray: (Tray select/switch)
Use as a normal tray.
High priority tray: (Valid with Tray
select only). If there is paper in the
MP tray and Duplex is not specified,
the printer uses the MP tray.
Feed when mismatching. When a
paper mismatch occurs (i.e. the
tray's paper size/media type does
not match the print data), a paper
request is issued to the MP Tray. If
the data is for Duplex print, a
specified tray is used instead of the
MP tray.
Do not use. Even if auto switching,
MP Tray will not be used. If MP Tray
is designated in Paper Feed, printer
behaves as though Normal Tray is
selected.
Sets whether the printer checks the
matching of paper size to that of the
tray. Only standard sizes are
checked.
Enable/Disable the transparency
auto detect function. (Used for
cutting if the sensor wrongly
detects).
Selects print resolution.
ON: Enables Toner Save mode.
OFF: Disables Toner Save mode.
Selects monochrome printing speed.
Auto: prints at the most appropriate
speed for page process.
Color
: prints always at the color print
speed.
Normal: Always prints at the
monochrome print speed.