Table of Contents
Advertisement
2 CE certification
The products described in the following instruction have been a subject of certification in a recognized unit and
meet the requirements of 89/686/EWG directive and of the norm EN1809:2001, synchronized with this
directive, in its full extent; and of EN 250:2003 covering scuba harness.
The compatibility assessment of ZEOS 38, HYDROS 50 and HYDROS 40 has been conducted by:
Polski Rejestr Statków S.A.,
Recognised certification unit nr 1463
Al.Gen.Józefa Hallera 126
80-416 Gdańsk
Poland
The compatibility assessment of ZEOS 28 has been conducted by:
VOP-026 Šternberk, s.p.
Jednostka notyfikowana nr 1380
Olomoucká 1841/175
785 01 Šternberk
Czech Republic
ZEOS 38, ZEOS 28, HYDROS 50 and HYDOS 40 buoyancy compensators has been certified as compatible with
89/686/EWG directive, as far as it contains air compatible with EN 12021 norm. Regarding the lack of EN norms
for safety requirements while the use of it takes place with mixtures of higher oxygen content, the above
mentioned buoyancy compensator cannot be regarded as one which has been a subject of CE certification with
gas mixtures with oxygen level higher than 21% (+/- 2%) as stated in 89/686/EWG directive.
In non-EU countries additional conditions, law requirements and buoyancy compensator norms may exist.
Double check the current requirements in the country in which you intend to use it.
The buoyancy compensator is not a safety jacket: it does not guarantee a proper head-up position on the
Warning!
Warning!
surface.
Advertisement
Table of Contents
