Draytek Vigor2925 Series Quick Start Manual page 11

Interface
Factory Reset
USB1~USB2
WAN1~WAN2
LAN1~LAN5
PWR
ON/OFF
Downloaded from www.Manualslib.com
Description
Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual, release
the button. Then the router will restart with the
factory default configuration.
Connecter for a USB device (for 3G USB Modem or
printer).
Connecter for local network devices or modem for
accessing Internet.
Connecters for local network devices.
Connecter for a power adapter.
Power Switch.
manuals search engine
Vigor2925 Series Quick Start Guide
3