Saab 1987 900 Owner's Manual page 62

60 Car care and scheduled maintenance
Replacing headlight bulb
Turn the black bayonet ring counter-
clockwise to release the holder. Change the
bulb. Carefully insert the new bulb, taking
care not to touch the glass with your fin-
gers.
Insert and turn the holder until the grooves
fit the three corresponding edges in the re-
flector.
Lock the holder by turning the bayonet ring
clockwise.
Changing exterior lamp bulbs
The bulbs in the front light clusters are ac-
cessible from the engine compartment.
The bulb holder has a bayonet fitting. Grip
the two plastic tongues and twist the bulb
holder anti-clockwise. Pull the bulb holder
out ofthe fitting and change the bulb. Make
sure that the new bulb is securely fitted and
making good contact.
Front combination lamp
1 Parking light/corner light
2 Direction indicators/side position light
3 Side reversing ligh t
To change side direction indicators, push
the glass forwards to release the rear end of
the glass and change the bulb. When faste-
ning the glass, make sure that the groove in
the metal tongue engages the body sheet.
On sedans the rear lamp cluster bulbs are
accessible from inside the trunk compart-
ment. Remove the trim panel beneath the
trunk sill and pull back the trunk lining to
uncover the lamp housing. Press in the
retaining clips at each end of the housing
and remove the rear of the unit to gain
access to the bulbs.