Download  Print this page

Installing And Removing The Battery Pack - Acer 500 User Manual

Acer user's guide notebook computers extensa 500.
Hide thumbs

Advertisement

3. Disconnect the adapter to use up the battery before
recharging again.
You only need to do this once or twice with a new battery or
with a battery that's been stored without being used for a
long time. If the computer is to be stored for more than two
weeks, we suggest you remove the battery pack. Battery
power from a fully charged battery pack depletes in roughly
a day with the computer in Standby mode, a month in
Hibernation mode or when power is off.
Warning! Do not expose battery packs to
temperatures below 0ºC (32ºF) or above 60ºC (140ºF).
This may adversely affect the battery pack.

Installing and Removing the Battery Pack

Important!
that you have an AC adapter connected to the computer;
otherwise turn off the computer.
To install a battery pack, slide it into the battery
compartment, then latch the battery compartment cover.
Reverse the steps to remove the battery pack.
Chapter 2 Operating on Battery Power
Before removing the battery pack, make sure
Battery Pack
31

Advertisement

Table of Contents

   Also See for Acer 500

This manual is also suitable for:

Extensa 500 series

Comments to this Manuals

Symbols: 0
Latest comments: