Duplex Unit; Printer; Printer Driver; Windows 2000/Nt 4.0 Postscript - Oki C9000 Series Setup Manual

Duplex unit

If your printer includes the duplex unit, please use the
following procedure to make sure that duplex printing
has been enabled in the printer and printer driver.

Printer

1. Press Menu (0) button until PRINT MENU is
displayed, then press Select (3) button.
2. Press Item (1) button until DUPLEX is
displayed.
3. Press Value (2) button until ON is displayed and
press Select (3) button. An asterisk (*) appears to
show that duplex has been set to on.
4. Press Online (4) button to turn the printer back
on line.

Printer driver

Windows 2000/NT 4.0 PostScript

1. Click on [Start] - [Settings] - [Printers].
2. Highlight the printer name and click on [File]
then [Properties].
40
3. Click on [Device Settings] tab.
4. Highlight [Duplex], then select [Installed] and
click on [OK].

Windows 2000 PCL

1. Click on [Start] - [Settings] - [Printers].
2. Highlight the printer name and click on [File]
then [Properties].
OKI C9000 Series