Please note the following situations will lead to the MicroSD card is not working:
Card metal contact pads are not clean, battery voltage instability, the slot being squeezed, slot internal wire rust or bend
excessively, the card infected with a virus, the card is not properly formatted, damaged cards, slot damage.
Installing SIM Card
The SIM card slot is located under the battery, and only support in GPRS model of PT30 series.
1. Take out the battery and follow the figure 1 arrow indicate switch the SIM card cover to unlock position then open the
card cover.
2. Turn the SIM card metal contact points face down then put into the slot.
3. Switch the SIM card cover to lock position.
Adjusting the Hand Strap
The PT30 Series hand strap is attached to the bottom of the terminal. Adjust the hand strap to increase comfort when
holding the terminal for extended periods of time.
8