Installing The Micro Sd Card/Micro Sim Card/Psam Card - Newland MT65 beluga II User Manual

Installing the Micro SD Card/Micro SIM Card/PSAM Card

Step 1: Unbuckle and loosen the hand strap. Unlock the battery cover latches and remove the battery cover and battery.
Slide the slot cover rightward and Lift the left end of it.
Step 2: Insert the Micro SD card/ Micro SIM card into the holder, with its metal contacts facing down.
Step 3: Close the slot cover and slide it leftward until it clicks.
Step 4: Insert the PSAM card from left to right into the corresponding card slot.
Note: If the terminal stops responding to input or runs abnormally, you may insert a pin or needle into the Reset hole and
then press it in to reset the terminal.
13