Normal Copying; One-Sided Copying - Sharp SF-2540 Operation Manual

NORMAL COPYING

Use the document glass for copying single originals and bound
documents. If an optional reversing automatic document feeder
(RADF) is installed, multipage documents can be copied auto-
matically. See page 49.
Image loss (max. 4 mm (5/32")) can occur at the leading and
trailing edges of the copies.

One-sided copying

Original size detector
COPY RATIO
1 0 0 %
EXPOSURE
AUTO
EXPOSURE LIGHT
AUTO
MANUAL
PHOTO
EXPOSURE
AUTO
EXPOSURE
AUTO
MANUAL
PHOTO
Downloaded From ManualsPrinter.com Manuals
1
2
3
ORIGINAL
A4
AUTO PAPER
SELECT
1. A4
2. A3
DARK TRAY SELECT
1. A4
4
2.
A3
LIGHT DARK
Open the document cover and place an original face
down on the document glass, using the centring scale
to position it.
NOTE:
Do not place objects under the original size detector, because
they may damage it.
Close the document cover.
The original size will be detected and indicated in the message
display.
Ensure that the desired paper tray is selected.
Paper matching the size of the original will be automatically
selected when the auto paper select function is enabled. To
copy onto paper of a different size, press the TRAY SELECT
key. (216 mm x 330 mm (8-1/2" x 13") size paper is regarded
as B4 (8-1/2" x 14") size.)
The auto paper select function can be disabled using a key
operator program. If this function is disabled, use the TRAY
SELECT key to select the desired paper tray.
KEY OPERATOR See page 93 to enable or disable the auto paper
selection.
Adjust the copy density.
This copier has three selectable exposure modes –
AUTOMATIC, MANUAL and PHOTO.
Automatic exposure is the standard initial setting for this
copier. In this mode, the characteristics of the original are
"read" by the exposure system and adjustments are
automatically made. This optimizes the contrast of the copied
images by reducing the effect of coloured or shaded
background areas.
KEY OPERATOR See page 87 to adjust the automatic exposure
level.
7