Table of Contents
Advertisement
1
2
4
5
8
7
AUDIT CLEAR
0
C
APLE
RT
OUP
PRE-COUNT
ORIGINALS
1
2
4
5
7
8
AUDIT CLEAR
0
C
Downloaded From ManualsPrinter.com Manuals
3
3
START
6
9
4
1
2
10
3
3
START
6
4
9
Enter the desired number of copies.
The maximum number of copies in the two-sided copy mode is
50 for A5, A4, and A4R (8-1/2" x 11" and 8-1/2" x 11"R) and 30
for B4 and A3 (8-1/2" x 14" and 11" x 17") paper. If the
specified number of copies exceeds the above number, the
copy quantity display will display the maximum allowable
number after copying starts. If an optional sorter is installed,
the display will change to 20 after copying starts (in sort
mode).
Press the START key.
To cancel a copy run during duplex copying, press the CLEAR
ALL (
) key. Manually remove any copies remaining in
the duplex module following the procedure for removing
misfed paper from the duplex module. (See page 35.)
1-sided copies from 2-sided originals
Adjust the original guides to the size of the originals
and set the originals face up in the document feeder
tray.
Use the ORIGINAL TO COPY key to select
Enter the desired number of copies.
Press the START key.
To cancel a copy run, press the CLEAR ALL (
Copying will stop and the RADF will output any originals which
have been fed. Also, the number in the copy quantity display
will be reset to 0.
RADF (SF-A58)
.
) key.
53
Advertisement
Chapters
Table of Contents
