Normal Copying - Sharp SF-1116 Operation Manual

NORMAL COPYING

PAPER SIZE
A3
A4
A4
R
A5
B4
8 1 13
2
EXTRA
AUTO
1 2 3 4 5
1 Turn the power switch on.
It will take about 35 seconds for the copier to warm up. However,
you can make desired settings and press the print (
during warm-up. Copying will start after warm-up.
If the copier has been programmed in the auditing mode, the
READY indicator will not light up and "–––" will appear in the
copy quantity display. Enter an assigned 3-digit account number.
See page 8.
If the power is already on and all indicators except the POWER
SAVE ( ) indicator are off, the copier is in the auto power
shut-off mode. Press the print (
page 37, POWER SAVE MODES.
2 Place the original face down on the document glass.
Align it with the original size scale.
Image loss (max. 4 mm (5/32")) can occur at the leading and
trailing edges of the copies.
3 Close the document cover.
4 Ensure that the copy paper size in the paper tray is the
same size as the original.
If an optional multi bypass feeder is installed, use the TRAY
SELECT (
paper the same size as the original.
5 Adjust the copy density.
This copier has three exposure modes to choose from —
AUTOMATIC (
Automatic exposure is the standard initial setting for this copier.
In this mode, the characteristics of the original are "read" by the
exposure system and adjustments are automatically made. This
optimizes the contrast of the copied images by reducing the
effect of coloured or shaded background areas. See page 19 to
E
adjust the automatic exposure level.
) button in this case. See
) key to select the paper feed station containing
), MANUAL ( ), and PHOTO (
) button
).
9