Sharp SF-2540 Operation Manual page 15

DD NUMBER
100%
RE-COUNT
RIGINALS
COPY RATIO
1 4 1 %
EXPOSURE
AUTO
EXPOSURE LIGHT
AUTO
MANUAL
PHOTO
1 2
4 5
7 8
AUDIT CLEAR
0 C
Downloaded From ManualsPrinter.com Manuals
ZOOM
E
AU
MA
PH
ORIGINAL
A4
AUTO PAPER
SELECT
1. A4
2. A3
DARK TRAY SELECT
3
START
6
9
REDUCTION/ENLARGEMENT/ZOOM
Manual
1 Place the original face down on the document glass
and close the document cover.
2 Use the reduction (
ZOOM keys to set the desired copy ratio.
A. Preset reduction ratios are: 86%, 81%, 70%, and 50% (95%,
77%, 64%, and 50%).
B. Preset enlargement ratios are: 115%, 122%, 141%, and
200% (121%, 129%, 141%, and 200%).
C. Zoom ratios: Any ratio from 50% to 200% can be set in 1%
increments.
Press the reduction (
set the approximate ratio, then press the
the ratio or the
To decrease or increase the zoom ratio rapidly, press and hold
the or
reduction or enlargement ratios. To move beyond these ratios,
release the key and then press and hold it again.
D. Same-size copying: Press the 100% key to reset the copy
ratio to 100%.
3 Ensure that the desired tray is selected.
If the AUTO PAPER SELECT mode is on, the appropriate copy
paper size will have been automatically selected based on the
original size and selected copy ratio.
If a tray of the required size is not installed, use the manual feed
tray and press the TRAY SELECT key to select the manual
feed tray.
4 Enter the desired number of copies.
Press the START key.
5
), enlargement (
) key or enlargement (
key to increase the ratio.
key. However the value will stop at the preset
) and
) key to
key to decrease
13