Sharp SF-2540 Operation Manual page 2

SF-2530
In some areas, the "POWER" switch positions are marked " I" and "
instead of "ON" and "OFF".
The symbol " " denotes the copier is not completely de-energized but in a stand-by
condition at this "POWER" switch position.
If your copier is so marked, please read "I" for "ON" and "
Caution!
For a complete electrical disconnection, pull out the main plug.
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
The CE mark logo label is affixed on an equipment in case that the directives described in the above
sentence are applicable to the product. (This sentence is not applicable in any country where the
above directives are not required.)
Downloaded From ManualsPrinter.com Manuals
" on the copier
" for "OFF".
CINSE1794FC51