Memory Menu - Oki C5250 User Manual

NETWORK MENU
ITEM
IP ADDRESS
SUBNET MASK
GATEWAY
ADDRESS
INITIALIZE
NIC?
WEB/IPP
TELNET
FTP
SNMP
LAN
M
EMORY MENU
This menu determines how printer memory is used.

MEMORY MENU

ITEM
RECEIVE BUF
SIZE
FLASH
INITIALIZE
SETTINGS
xxx.xxx.xxx.xxx Current assigned IP address. To
xxx.xxx.xxx.xxx Current assigned subnet mask. To
xxx.xxx.xxx.xxx Current assigned gateway address.
EXECUTE
ENABLE /
DISABLE
ENABLE /
DISABLE
ENABLE /
DISABLE
ENABLE /
DISABLE
NORMAL / SMALL
SETTINGS
AUTO, 0.5MB,
1MB, 2MB, 4MB,
8MB, 16MB
EXECUTE
Menu functions> 41
EXPLANATION
change, press ENTER and use +/–
keys to increment 1st octet, then
press ENTER again to move on to
next octet. When 4th octet has been
set, press ENTER again to register
new address.
change, proceed as above.
To change, proceed as above.
Initialises the network hardware.
Enables or disables Web config.
facility and Internet Printing
Protocol.
Enables or disables Telnet config.
facility.
Enables or disables communication
via FTP.
Enables or disables SNMP protocol.
EXPLANATION
Sets the size of buffer memory for
receiving incoming data. Normally
this is allocated dynamically as
required.
Clears all data from flash memory.