Table of Contents
Advertisement
Changing brake lamp, reversing lamp and direction indicator bulbs
These three bulbs are changed from inside the boot:
open the boot,
remove the access grille from the
corresponding side trim panel,
slacken and remove the nut,
disconnect the lamp unit connector,
unclip the lamp unit carefully extract it
pulling in line towards the outside,
press the four tabs and remove the bulb
holder,
turn the bulb a quarter of a turn and change it.
To reassemble, carry out these operations in
reverse order.
Take care to engage the lamp unit in its guides,
while keeping it in line with the vehicle.
Tighten sufficiently to ensure sealing, but
without damaging the lamp.
Practical information
7
161
Advertisement
Table of Contents
