Table of Contents
Advertisement
Changing direction indicator
bulbs
Rapid flashing of the direction indicator
warning lamp (right or left) indicates the
failure of a bulb on that side.
Turn the bulb holder a quarter of a turn and
extract it.
Pull out the bulb and change it.
To reassemble, carry out these operations in
reverse order.
Amber coloured bulbs, such as the
direction indicators, must be replaced
with bulbs of identical specifications
and colour.
When refitting, close the protective
cover carefully to preserve the sealing
of the headlamp.
Practical information
Changing dipped beam headlamp
bulbs
Remove the protective cover by pulling on
the tab.
Disconnect the bulb connector.
Spread the spring to release the bulb
(model A ).
A
Extract the bulb and change it.
To reassemble, carry out these operations in
reverse order, positioning the alignment lug at
the bottom (model A ) or at the top (model
A
7
B ).
157
Advertisement
Table of Contents
