Using The Colour Correct Utility - Oki C5200n User Manual

An example of using the colour swatch function:
You wish to print a logo in a particular shade of red. The steps you
would follow are:
1. Print a colour swatch, then select the shade of red that best
suits your needs.
2. Take a note of the RGB value for the particular shade that you
liked.
3. Using your program's colour picker, enter these same RGB
values, and change the logo to that colour.
The RGB colour displayed on your monitor may not necessarily match
what was printed on the colour swatch. If this is the case, it is
probably due to the difference between how your monitor and printer
reproduce colour. Here, it is unimportant since your primary objective
is to print the required colour.

USING THE COLOUR CORRECT UTILITY

The Oki Colour Correct Utility is provided on your printer driver CD-
ROM. You must install it separately since it is not installed along with
the printer driver.
The Colour Correct utility has the following features:
> Microsoft Office palette colours can be individually adjusted.
This is useful if you want to change how a specific colour is
printed.
> Colours can be adjusted by changing Hue, Saturation and
Gamma. This is useful if you wish to change the overall colour
output.
Once these colour adjustments have been made, the new settings can
be selected from the printer driver Colour tab.
To select adjustments made with the Colour Correct Utility:
1. From your application program, click File and point to Print.
2. Click Properties. This displays the printer driver options.
3. Click the Colour tab.
COLOUR PRINTING > 31