Output Bin; Auto Tray Switch; Paper Size Check; Priority Tray - Oki C 9400 User Manual

OUTPUT BIN

Selects whether the print job will go to the top exit (FACE-DOWN) or the straight-through exit
(FACE-UP).

AUTO TRAY SWITCH

Change this to OFF if you do not want the printer to automatically switch to another feed tray
with the same size and type of media when the present tray runs out of media.

PAPER SIZE CHECK

Normally the printer will check to see that the media size being specified by the print job
matches what is in the feed tray and signals a mismatch with a warning message on the display.
If you do not wish the printer to provide such warning messages, change this setting to Disable.

PRIORITY TRAY

Change this setting to MP TRAY if you wish the printer to look for media in the Multi-Purpose
Tray first, before using Tray 1.

RESOLUTION

Sets the default print resolution.
Note: Resolution settings you make in the printer drivers will override this menu setting.

MONO-PRINT SPEED

Sets the print speed for printing monochrome documents:
AUTO (default) = Switches to mono print speed if more than three pages in a row are
detected as monochrome printing.
COLOR = Sets the printer to the color print speed. Use this setting if you will be printing
documents which have a few monochrome pages interspersed with color pages.
NORMAL = Sets the printer to the monochrome print speed . Use this setting to increase
the print speed if you are printing a multi-page monochrome document.

ORIENTATION

Sets the default print orientation.
132